72V841L10TF8
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 4KX9 |
| Density | 72 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V841L10TF8 Overview
LQFP is the package in which FIFO memory chip is contained.It's packaged in the shape of a Tape & Reel .Mounting it Surface Mount is recommended.With a supply voltage of 3.3V volts, high efficiency is possible.FIFO means contains 64 terminations.The operation pins are 64 pins.In order for FIFO design to operate, FIFO design requires a maximum current of 40mA .FIFO is recommended that the supply voltage be set to 3.3V for maximum efficiency.FIFO operates at a minimum temperature of 0°C degrees Celsius to ensure reliabilFIFOy.A memory logic's maximum operating temperature of 70°C degrees Celsius assures stable operation.A self-contained gadget is contained within FIFOs .This part is equipped with an IC of type OTHER FIFO memory.FIFO memory chips may be operated at very low supply voltages, such as 3V volts.An input voltage of 3.6V V is the maximum that FIFO memory can handle.A total of 64 pins are present on the FIFO memory IC.In spite of the frequency 100MHz , it is capable of maintaining a good level of accuracy.Normally, the FIFO memory's maximum value is 100MHz .
72V841L10TF8 Features
FIFOs category
Frequency at most
72V841L10TF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V841L10TF8 FIFOs Memory applications.
- Smart Meter
- Communications
- Application that requires re-writable nonvolatile parameter memory
- General Data Collection Applications at Extreme High-Temperatures
- Buses
- Magnetic memories
- Cardiac Monitoring Device
- High-speed graphics pixel buffer
- Computers
- TVs
