72V841L15PFI8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 4KX9 |
| Density | 72 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V841L15PFI8 Overview
You can find FIFO memory chip in package TQFP .The package comes in a case of Tape & Reel .The recommended mounting method for this FIFO products is Surface Mount .When the supply voltage is 3.3V , high efficiency is possible.As a result of this, FIFO means contains 64 terminations.The operation pins are 64 pins.FIFO design requires a maximum current of 40mA to operate.FIFO is recommended that the supply voltage be set to 3.3V for maximum efficiency.In order to ensure reliability, FIFO is maintained at -40°C degrees Celsius at all times.Its maximum operating temperature of 85°C °C ensures stable operation.It is self-contained in FIFOs .A OTHER FIFO memory type IC is used in the part.There is a possibility that FIFO can operate at very low supply voltages, such as 3V V.A maximum supply voltage of 3.6V volts can be handled by the FIFO memory chip.A total of 64 pins are present on the FIFO memory IC.A frequency of 66.7MHz is sufficient to maintain good accuracy.Normally, the FIFO memory's maximum value is 66.7MHz .
72V841L15PFI8 Features
FIFOs category
Frequency at most
72V841L15PFI8 Applications
There are a lot of Integrated Device Technology (IDT) 72V841L15PFI8 FIFOs Memory applications.
- Computer networks
- Wireless
- Cardiac Monitoring Device
- Alarm System
- Programmable Logic Controller
- General Data Collection Applications at Low-Temperatures
- Network bridges
- Address mapping
- Data communications
- Thermal Management for DDR3 Memory Modules
