72V841L15TF
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 4KX9 |
| Density | 72 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V841L15TF Overview
LQFP is the package in which FIFO memory chip is contained.The recommended mounting method for this FIFO products is Surface Mount .When the supply voltage is 3.3V , high efficiency is possible.FIFO means contains 64 terminations.There are 64 pins on the operation pins.The maximum current required for its operation is 40mA .The supply voltage should be set to 3.3V in order to achieve FIFO's maximum efficiency.This FIFO products runs at 0°C degrees Celsius at a minimum temperature to ensure reliability.Its maximum operating temperature of 70°C °C ensures stable operation.A self-contained gadget is contained within FIFOs .The IC of the part is of the type OTHER FIFO .Low supply voltages, such as 3V V, may be required for operation.FIFO memory is capable of handling a maximum supply voltage of 3.6V volts.The FIFO memory IC is equipped with a total of 64 pins.A frequency of 66.7MHz is sufficient to maintain good accuracy.A FIFO memory's maximum value of 66.7MHz can be used for regular operation.
72V841L15TF Features
FIFOs category
Frequency at most
72V841L15TF Applications
There are a lot of Integrated Device Technology (IDT) 72V841L15TF FIFOs Memory applications.
- Analog-to-digital converters
- Programmable Logic Controller
- Code converters
- Battery Charger
- Test site
- Fabrication Site
- Emulators
- Data communications
- Networking
- Network bridges
