72V845L10PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Pin Count | 128 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 4KX18 |
| Density | 144 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| Retransmit Capability | No |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V845L10PF Overview
The TQFP package contains FIFO memory chip.A Surface Mount mounting method is recommended.With a supply voltage of 3.3V volts, high efficiency is possible.FIFO means contains 128 terminations.As far as the operation pins are concerned, they are 128 pins.The maximum current required for its operation is 60mA .A voltage of 3.3V should be used for FIFO's maximum efficiency.During operation, a minimum temperature of 0°C degrees Celsius should be maintained in order to ensure reliability.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.The gadget in FIFOs is self-contained.ICs of type OTHER FIFO are used in the FIFO memory chip.In some cases, FIFO operates at a very low supply voltage, such as 3V V.The memory logic's maximum supply voltage is 3.6V volts.A total of 128 pins are present on the FIFO memory IC.When the frequency is set to 100MHz , the system can maintain good accuracy.During regular operation, 100MHz is the FIFO memory's maximum value.
72V845L10PF Features
FIFOs category
Frequency at most
72V845L10PF Applications
There are a lot of Integrated Device Technology (IDT) 72V845L10PF FIFOs Memory applications.
- Desktop Computers
- Telecommunication
- Programmable Logic Controller
- SPD for DDR3 Memory Modules
- Network bridges
- Medical Monitoring Device
- Product traceability
- High-speed graphics pixel buffer
- Emulators
- Look-up Tables
