72V845L10PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Pin Count | 128 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 4KX18 |
| Density | 144 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| Retransmit Capability | No |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V845L10PF8 Overview
The TQFP package contains FIFO memory chip.Mounting it in the Surface Mount way is recommended.It is possible to achieve high efficiency with a supply voltage of 3.3V .The number of terminations in FIFO means is 128 .128 pin is used for operation.FIFO design requires a maximum current of 60mA to operate.When setting the supply voltage to 3.3V , you will achieve FIFO's maximum efficiency.FIFO operates at a minimum temperature of 0°C degrees Celsius to ensure reliabilFIFOy.An operating temperature of 70°C °C is necessary for stable operation.This gadget is self-contained in?FIFOs .ICs of type OTHER FIFO are used in the FIFO memory chip.In some cases, FIFO operates at a very low supply voltage, such as 3V V.A maximum supply voltage of 3.6V V can be handled by this FIFO memory chip.A total of 128 pins are present on the FIFO memory IC.A frequency of 100MHz is sufficient to maintain good accuracy.During normal operation, the FIFO memory's maximum value is 100MHz .
72V845L10PF8 Features
FIFOs category
Frequency at most
72V845L10PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V845L10PF8 FIFOs Memory applications.
- Product traceability
- Data-acquisition systems
- Firmware loaders
- Portable Information Devices
- Wireless
- Magnetic memories
- Application that requires re-writable nonvolatile parameter memory
- Computers
- Data
- A/D output buffers
