72V845L15PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 66.7MHz |
| Pin Count | 128 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 4KX18 |
| Density | 144 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| Retransmit Capability | No |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V845L15PF8 Overview
You can find FIFO memory chip in the TQFP package.Memory IC's recommended mounted way is Surface Mount .A supply voltage of 3.3V is capable of producing high efficiency.A total of 128 terminations can be found in FIFO means.The operation pins are 128 pins.FIFO requires a minimum of 60mA current to operate.For FIFO's maximum efficiency, the supply voltage should be set to 3.3V .For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.Its maximum operating temperature of 70°C °C ensures stable operation.It is contained within FIFOs .A OTHER FIFO memory type IC is used in the part.Typically, FIFO would work at 3V volts, but it may also work at higher voltages.This FIFO memory chip can handle maximum supply voltages of 3.6V volts.Currently, it has 128 pins.A frequency of 66.7MHz is sufficient to maintain good accuracy.The memory logic's maximum value is 66.7MHz for regular operation.
72V845L15PF8 Features
FIFOs category
Frequency at most
72V845L15PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V845L15PF8 FIFOs Memory applications.
- GPS Offender Tracking
- Optical memories
- Event Recorder
- Test site
- Firmware loaders
- Data
- High-speed graphics pixel buffer
- HDD
- Extended product-change notification
- Magnetic memories
