72V845L15PFI
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 66.7MHz |
| Pin Count | 128 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 4KX18 |
| Density | 144 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
72V845L15PFI Overview
TQFP is a package that contains FIFO memory chip.A Surface Mount mounting method is recommended.A supply voltage of 3.3V is capable of producing high efficiency.A total of 128 terminations are contained within FIFO means.128 pins are used for operation.FIFO design requires a maximum current of 60mA to operate.In order to maximize efficiency, the supply voltage should be set to 3.3V .The FIFO products must be run at a minimum temperature of -40°C degrees Celsius to ensure reliability.By using a memory logic's maximum operating temperature of 85°C degrees Celsius, stable operation can be achieved.A self-contained gadget is contained within FIFOs .It has a type OTHER FIFO memory IC.Typically, FIFO would work at 3V volts, but it may also work at higher voltages.FIFO memory can handle a maximum supply voltage of 3.6V V.The FIFO memory IC has a total of 128 pins.It maintains good accuracy at a 66.7MHz frequency.During normal operation, the FIFO memory's maximum value is 66.7MHz .
72V845L15PFI Features
FIFOs category
Frequency at most
72V845L15PFI Applications
There are a lot of Integrated Device Technology (IDT) 72V845L15PFI FIFOs Memory applications.
- Tape controllers
- IP Camera Buffer
- PC peripheral
- Consumer
- General Data Collection Applications at Low-Temperatures
- Seismic Data Collection at Extreme Temperatures
- Computer Systems
- Rate buffers
- Network bridges
- Character generators
