72V845L20PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 50MHz |
| Pin Count | 128 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 50MHz |
| Access Time | 12 ns |
| Organization | 4KX18 |
| Density | 144 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| Retransmit Capability | No |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V845L20PF Overview
This package is included in TQFP .The recommended mounting method for this FIFO products is Surface Mount .An input voltage of 3.3V results in high efficiency.FIFO means contains 128 terminations.These are the 128 pins for operation.FIFO design requires 60mA amps of current to operate.Set the supply voltage to 3.3V to ensure FIFO's maximum efficiency.It is designed to run at a minimum temperature of 0°C degrees Celsius to ensure reliability.By operating at 70°C degrees Celsius, this FIFO products is able to maintain a stable operation.A self-contained gadget is contained within FIFOs .The IC of the part is OTHER FIFO memory type.FIFO memory chips may be operated at very low supply voltages, such as 3V volts.FIFO memory is capable of handling a maximum supply voltage of 3.6V volts.As a result, it contains a total of 128 pins.A frequency of 50MHz is capable of maintaining good accuracy.During regular operation, 50MHz is the FIFO memory's maximum value.
72V845L20PF Features
FIFOs category
Frequency at most
72V845L20PF Applications
There are a lot of Integrated Device Technology (IDT) 72V845L20PF FIFOs Memory applications.
- Address mapping
- SPI Bus Flash Memory Devices
- Digital buffering
- Firmware loaders
- Network switching/routing
- Consumer
- SPI Bus Flash Memory Device
- IP Radio
- Game Consoles
- General Data Collection Applications at Extreme High-Temperatures
