72V84L15PA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 56 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 56 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 100mA |
| Max Supply Current | 100mA |
| Clock Frequency | 40MHz |
| Access Time | 15 ns |
| Direction | Bidirectional |
| Organization | 4KX9 |
| Density | 72 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | YES |
| Cycle Time | 25 ns |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| Width | 6.1mm |
| Thickness | 1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V84L15PA Overview
TSSOP is the package in which FIFO memory chip is contained.Surface Mount is recommended as the mounting method.If the supply voltage is set to 3.3V , high efficiency can be achieved.The number of terminations in FIFO means is 56 .FIFO design has 56 operation pins.There is a maximum current requirement of 100mA for its operation.FIFO is recommended that the supply voltage be set to 3.3V in order to maximize efficiency.It is designed to run at a minimum temperature of 0°C degrees Celsius to ensure reliability.By operating at 70°C degrees Celsius, this FIFO products is able to maintain a stable operation.A self-contained gadget is contained within FIFOs .A OTHER FIFO memory type IC is used in the part.Low supply voltages, such as 3V V, may be required for operation.A maximum voltage of 3.6V volts can be applied to FIFO memory.There are a total of 56 pins on this FIFO memory IC.Additionally, this FIFO memory is capable of generating RETRANSMIT as well.In this FIFO memory IC, the clock runs at frequency 40MHz .
72V84L15PA Features
FIFOs category
Clock frequency of 40MHz
72V84L15PA Applications
There are a lot of Integrated Device Technology (IDT) 72V84L15PA FIFOs Memory applications.
- Video time base correction
- Transistors
- Portable Information Devices
- Wireless
- Digital buffering
- Controlled baseline
- Game Controller
- Test Equipment
- Address mapping
- Seismic Data Collection at Extreme Temperatures
