72V84L15PAG
| Parameters | |
|---|---|
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 56 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 100mA |
| Max Supply Current | 100mA |
| Clock Frequency | 40MHz |
| Access Time | 15 ns |
| Direction | Bidirectional |
| Organization | 4KX9 |
| Density | 72 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 25 ns |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| Width | 6.1mm |
| Thickness | 1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 56 |
| Published | 1997 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
72V84L15PAG Overview
FIFO memory chip can be found in the TSSOP package.Mounting it Surface Mount is recommended.High efficiency is possible with a supply voltage of 3.3V .FIFO consists of 56 terminations, which indicates that FIFO means is empty.There are 56 pins for operation.There is a maximum current requirement of 100mA for its operation.FIFO is recommended that the supply voltage be set to 3.3V for maximum efficiency.In order to ensure reliability, FIFO is maintained at 0°C degrees Celsius at all times.As a result of having a maximum operating temperature of 70°C degrees Celsius, the unit is capable of exhibiting stable operation.It is self-contained in FIFOs .This part is equipped with an IC of type OTHER FIFO memory.It is possible to operate the FIFO memory chip at very low supply voltages, such as 3V volts.FIFO memory can handle a maximum supply voltage of 3.6V volts.There are a total of 56 pins on this board.It is also possible to generate RETRANSMIT using this FIFO memory.The FIFO memory IC is controlled by a clock with a frequency of 40MHz .
72V84L15PAG Features
FIFOs category
Clock frequency of 40MHz
72V84L15PAG Applications
There are a lot of Integrated Device Technology (IDT) 72V84L15PAG FIFOs Memory applications.
- Data
- Network bridges
- Disk Controllers
- SPI Bus Flash Memory Devices
- Notebook
- GPS Offender Tracking
- PC peripheral
- TVs
- Seismic Data Collection at Extreme Temperatures
- Queues for communication systems
