72V84L15PAG8
| Parameters | |
|---|---|
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 56 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 100mA |
| Max Supply Current | 100mA |
| Clock Frequency | 40MHz |
| Access Time | 15 ns |
| Direction | Bidirectional |
| Organization | 4KX9 |
| Density | 72 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | BI-DIRECTIONAL FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 25 ns |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| Width | 6.1mm |
| Thickness | 1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 56 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
72V84L15PAG8 Overview
You can find FIFO memory chip in the TSSOP package.Surface Mount is recommended as the mounting method.A supply voltage of 3.3V is capable of producing high efficiency.The number of terminations in FIFO means is 56 .56 pins are used for operation.There is a maximum current requirement of 100mA for its operation.A supply voltage of 3.3V is recommended for FIFO's maximum efficiency.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.In FIFOs , this gadget is self-contained.The IC of the part is BI-DIRECTIONAL FIFO memory type.If the supply voltage is very low, such as 3V V, FIFO may be able to operate.The memory logic's maximum supply voltage is 3.6V volts.There are a total of 56 pins on this board.With the help of this FIFO memory, RETRANSMIT can also be generated.There is 40MHz frequency set for the clock of the FIFO memory IC.
72V84L15PAG8 Features
FIFOs category
Clock frequency of 40MHz
72V84L15PAG8 Applications
There are a lot of Integrated Device Technology (IDT) 72V84L15PAG8 FIFOs Memory applications.
- Tape controllers
- Video
- Desktop Computers
- Thermal Management for DDR3 Memory Modules
- A/D output buffers
- Look-up Tables
- Extended product life cycle
- Portable Information Devices
- Video time base correction
- SPI Bus Flash Memory Device
