72V851L10PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 8KX9 |
| Density | 144 kb |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V851L10PF8 Overview
TQFP is a package that contains FIFO memory chip.Mounting it in Surface Mount is recommended.A supply voltage of 3.3V allows for high efficiency.FIFO means contains 64 terminations.Operation pins are 64 .In order for FIFO design to operate, FIFO design requires a maximum current of 40mA .FIFO is recommended that the supply voltage be set to 3.3V in order to maximize efficiency.Keeping the temperature at 0°C degrees Celsius ensures its reliability.The memory logic's maximum operating temperature is 70°C °C, which allows for stable operation.The gadget is self-contained and can be found in FIFOs .ICs of type OTHER FIFO are used in the FIFO memory chip.FIFO may operate at a very low supply voltage, such as 3V V.This FIFO memory chip can handle maximum supply voltages of 3.6V volts.Approximately 64 pins are attached to it.It maintains good accuracy at a 100MHz frequency.During normal operation, the FIFO memory's maximum value is 100MHz .
72V851L10PF8 Features
FIFOs category
Frequency at most
72V851L10PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V851L10PF8 FIFOs Memory applications.
- Temporary storage elements
- TVs
- Seismic Data Collection at Extreme Temperatures
- Buses
- Game Consoles
- Product traceability
- Transistors
- Video
- A/D output buffers
- GPS Offender Tracking
