72V851L10TF8
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 8KX9 |
| Density | 144 kb |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
72V851L10TF8 Overview
You can find FIFO memory chip in the TQFP package.It is pointing in the direction of Surface Mount .High efficiency is possible with a supply voltage of 3.3V .As a result of this, FIFO means contains 64 terminations.FIFO design has 64 operation pins.In order for FIFO design to operate, FIFO design requires a maximum current of 40mA .A voltage of 3.3V should be used for FIFO's maximum efficiency.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.An operating temperature of 70°C °C is necessary for stable operation.The gadget in FIFOs is self-contained.This part is equipped with an IC of type OTHER FIFO memory.The FIFO memory chip may be operated at very low supply voltages, such as3V volts.This FIFO memory chip can handle maximum supply voltages of 3.6V volts.There are a total of 64 pins on this board.In the presence of a 100MHz frequency, it can maintain good accuracy.100MHz is the FIFO memory IC's maximum value for regular operation.
72V851L10TF8 Features
FIFOs category
Frequency at most
72V851L10TF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V851L10TF8 FIFOs Memory applications.
- Network bridges
- Video
- Rate buffers
- Signal processing
- Battery Charger
- Seismic Data Collection at Extreme Temperatures
- Programmable Logic Controller
- Smart Meter
- GPS Offender Tracking
- Video Processing
