72V851L10TFG
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 8KX9 |
| Density | 144 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | BI-DIRECTIONAL FIFO |
| Bus Directional | Bidirectional |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72V851L10TFG Overview
The LQFP package contains FIFO memory chip.The recommended mounting way is Surface Mount .A supply voltage of 3.3V is capable of producing high efficiency.FIFO consists of 64 terminations, which indicates that FIFO means is empty.The operation pins are 64 pins.The maximum current required for its operation is 40mA .The supply voltage should be set to 3.3V in order to achieve FIFO's maximum efficiency.This FIFO products runs at 0°C degrees Celsius at a minimum temperature to ensure reliability.70°C °C is the memory logic's maximum operating temperature that allows stable operation.The gadget is self-contained and can be found in FIFOs .A BI-DIRECTIONAL FIFO memory type IC is used in the part.FIFO may operate at a very low supply voltage, such as 3V V.An input voltage of 3.6V V is the maximum that FIFO memory can handle.This FIFO memory IC is equipped with 64 pins in total.A frequency of 100MHz is sufficient to maintain good accuracy.There is 100MHz FIFO memory IC's maximum value for regular operation.
72V851L10TFG Features
FIFOs category
Frequency at most
72V851L10TFG Applications
There are a lot of Integrated Device Technology (IDT) 72V851L10TFG FIFOs Memory applications.
- Microprogramming
- HDD
- Analog-to-digital converters
- Smart Meter
- IP Radio
- Firmware loaders
- Disk Controllers
- Cameras
- Thermal Management for DDR3 Memory Modules
- Computers
