72V851L15PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 8KX9 |
| Density | 144 kb |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
72V851L15PF Overview
The TQFP package contains FIFO memory chip.A Surface Mount mounting method is recommended.When the supply voltage is 3.3V there is the possibility of high efficiency.FIFO consists of 64 terminations, which indicates that FIFO means is empty.Operation pins are 64 .For its operation, 40mA is the maximum current required.A 3.3V supply voltage will ensure FIFO's maximum efficiency.This FIFO products runs at 0°C degrees Celsius at a minimum temperature to ensure reliability.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.This gadget is self-contained in?FIFOs .This part has a memory type of OTHER FIFO .Typically, FIFO would work at 3V volts, but it may also work at higher voltages.A maximum voltage of 3.6V volts can be applied to FIFO memory.Currently, it has 64 pins.A frequency of 66.7MHz is capable of maintaining good accuracy.A FIFO memory's maximum value of 66.7MHz can be used for regular operation.
72V851L15PF Features
FIFOs category
Frequency at most
72V851L15PF Applications
There are a lot of Integrated Device Technology (IDT) 72V851L15PF FIFOs Memory applications.
- MP3 Interface for Automobile
- Battery Charger
- Code converters
- Game Consoles
- Analog-to-digital converters
- Character generators
- SPI Bus Flash Memory Device
- Microprogramming
- Communications Systems
- Tape controllers
