72V851L15PFI8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Packaging | Tape and Reel |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 8KX9 |
| Density | 144 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
72V851L15PFI8 Overview
FIFO memory chip is contained in the TQFP package.You'll find it packaged in the shape of a Tape and Reel .It is recommended that memory IC be mounted in the Surface Mount direction.It is possible to achieve high efficiency with a supply voltage of 3.3V .As a result of this, FIFO means contains 64 terminations.There are 64 pins on the operation pins.FIFO design requires 40mA amps of current to operate.For FIFO's maximum efficiency, the supply voltage should be set to 3.3V .At a minimum working temperature of -40°C degrees Celsius, FIFO is guaranteed to operate reliably.The stable operation is enabled by the memory logic's maximum operating temperature of 85°C °C.There is a self-contained gadget within FIFOs .ICs of type OTHER FIFO are used in the FIFO memory chip.In some cases, FIFO operates at a very low supply voltage, such as 3V V.The FIFO memory chip is capable of handling maximum supply voltages of 3.6V volts.The FIFO memory IC is equipped with a total of 64 pins.With a frequency of 66.7MHz , it exhibits good accuracy.During regular operation, 66.7MHz is the FIFO memory's maximum value.
72V851L15PFI8 Features
FIFOs category
Frequency at most
72V851L15PFI8 Applications
There are a lot of Integrated Device Technology (IDT) 72V851L15PFI8 FIFOs Memory applications.
- Buses
- Routers
- Industrial Systems
- Communications Systems
- Network switching/routing
- Cardiac Monitoring Device
- Temporary storage elements
- Fabrication Site
- A/D output buffers
- Laser Receiver System
