72V851L15TF
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 8KX9 |
| Density | 144 kb |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
72V851L15TF Overview
This package is included in TQFP .Mounting it Surface Mount is recommended.An input voltage of 3.3V results in high efficiency.FIFO consists of 64 terminations, which indicates that FIFO means is empty.There are 64 pins for operation.In order to operate FIFO design, a maximum current of 40mA is required.When the supply voltage is set to 3.3V , the FIFO's maximum efficiency is achieved.In order to ensure reliability, FIFO is maintained at 0°C degrees Celsius at all times.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.It is contained within FIFOs .The IC of the part is of the type OTHER FIFO .If the supply voltage is very low, such as 3V V, FIFO may be able to operate.A maximum supply voltage of 3.6V V can be handled by this FIFO memory chip.It has a total of 64 pins on it.A frequency of 66.7MHz is capable of maintaining good accuracy.It is recommended that the FIFO memory's maximum value be set to 66.7MHz .
72V851L15TF Features
FIFOs category
Frequency at most
72V851L15TF Applications
There are a lot of Integrated Device Technology (IDT) 72V851L15TF FIFOs Memory applications.
- Magnetic memories
- Smart Meter
- Data communications
- Controlled baseline
- Routers
- Disk Controllers
- Game Controller
- General Data Collection Applications at Low-Temperatures
- Event Recorder
- Network switching/routing
