72V851L20PF8
| Parameters | |
|---|---|
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 50MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 50MHz |
| Access Time | 12 ns |
| Organization | 8KX9 |
| Density | 144 kb |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
72V851L20PF8 Overview
The TQFP package contains FIFO memory chip.Mounting it in Surface Mount is recommended.When the supply voltage is 3.3V , high efficiency is possible.FIFO consists of 64 terminations, which indicates that FIFO means is empty.64 pins are the operation pins.In order to operate FIFO design, a maximum current of 40mA is required.A supply voltage of 3.3V is recommended for FIFO's maximum efficiency.In order to ensure reliability, FIFO is maintained at 0°C degrees Celsius at all times.An operating temperature of 70°C °C is necessary for stable operation.In FIFOs , this gadget is self-contained.This part is equipped with an IC of type OTHER FIFO memory.It is possible to operate the FIFO memory chip at very low supply voltages, such as 3V volts.A maximum supply voltage of 3.6V volts can be handled by the FIFO memory chip.It consists of a total of 64 pins.Despite a frequency of 50MHz , it is capable of maintaining good accuracy.It is recommended that the FIFO memory's maximum value be set to 50MHz .
72V851L20PF8 Features
FIFOs category
Frequency at most
72V851L20PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V851L20PF8 FIFOs Memory applications.
- Network switching/routing
- SPI Bus Flash Memory Devices
- Multimedia
- Consumer Systems
- Communications Systems
- Extended product-change notification
- High-speed disk
- Game Controller
- Computers
- Extended product life cycle
