72V851L20TF
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Published | 2008 |
| Part Status | Discontinued |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Frequency | 50MHz |
| Operating Supply Voltage | 3.3V |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 50MHz |
| Access Time | 12 ns |
| Density | 144 kb |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
72V851L20TF Overview
You can find FIFO memory chip in package LQFP .The recommended mounting method for this FIFO products is Surface Mount .As far as the operation pins are concerned, they are 64 pins.In order to operate FIFO design, a maximum current of 40mA is required.When setting the supply voltage to 3.3V , you will achieve FIFO's maximum efficiency.To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of 0°C degrees Celsius.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.Low supply voltages, such as 3V V, may be required for operation.A maximum supply voltage of 3.6V volts can be handled by the FIFO memory chip.Despite a frequency of 50MHz , it is capable of maintaining good accuracy.The memory logic's maximum value is 50MHz for regular operation.
72V851L20TF Features
Frequency at most
72V851L20TF Applications
There are a lot of Integrated Device Technology (IDT) 72V851L20TF FIFOs Memory applications.
- SPI Bus Flash Memory Device
- Data-acquisition systems
- Laser Receiver System
- Battery Charger
- Address mapping
- High-speed graphics pixel buffer
- Data communications
- Controlled baseline
- Buses
- Switches
