72V85L20PA
| Parameters | |
|---|---|
| Thickness | 1mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 56 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 56 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Memory Size | 9kB |
| Element Configuration | Dual |
| Nominal Supply Current | 100mA |
| Max Supply Current | 100mA |
| Frequency (Max) | 33.3MHz |
| Access Time | 20 ns |
| Data Bus Width | 9b |
| Direction | Bidirectional |
| Organization | 8KX9 |
| Density | 144 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | YES |
| Cycle Time | 30 ns |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| Width | 6.1mm |
72V85L20PA Overview
The TSSOP package contains FIFO memory chip.There is a 9kB MB memory on the FIFO chips, which can be used to store both applications and data.The recommended mounting method for this FIFO products is Surface Mount .If the supply voltage is set to 3.3V , high efficiency can be achieved.I found that it has 56 terminations in FIFO means.There are 56 pins on the operation pins.The maximum current required for its operation is 100mA .When setting the supply voltage to 3.3V , you will achieve FIFO's maximum efficiency.To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of 0°C degrees Celsius.The memory logic's maximum operating temperature is 70°C °C, which allows for stable operation.The gadget in FIFOs is self-contained.This part has a memory type of OTHER FIFO .FIFO may operate at a very low supply voltage, such as 3V V.A maximum supply voltage of 3.6V V can be handled by this FIFO memory chip.The FIFO memory IC has a total of 56 pins.The memory logic's maximum value is 33.3MHz for regular operation.Additionally, this FIFO memory can be used to generate RETRANSMIT .
72V85L20PA Features
9kB memory size
FIFOs category
Frequency at most
72V85L20PA Applications
There are a lot of Integrated Device Technology (IDT) 72V85L20PA FIFOs Memory applications.
- Cameras
- Game Controller
- Signal processing
- Battery Charger
- Emulators
- Magnetic memories
- Extended product life cycle
- Disk Controllers
- Game Consoles
- Data-acquisition systems
