72V8980PVG8
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 48 |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Other Telecom ICs |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 3mA |
| Supply Current-Max | 0.005mA |
| Data Rate | 2.048 Mbps |
| Supply Type | Single |
| Telecom IC Type | DIGITAL TIME SWITCH |
| Independent Circuits | 1 |
| Height Seated (Max) | 2.794mm |
| Width | 7.5mm |
| RoHS Status | RoHS Compliant |
72V8980PVG8 Overview
In order to save board space, digital switch is located in the SSOP.Its basic configuration includes terminations in the 48 range.The multiplexer's system works with 3.3V voltage.In this turn signal switch, there are 48 component pins.As the end of conductors, it uses GULL WING.Single is used as its supply type.The board has 48 pins configured.The multiplexer ic is mounted in the direction of Surface Mount.I would classify the digital switch ic as an electronic part belonging to the Other Telecom ICs category.The performance of the multiplexers of a system can be reliably achieved with a supply voltage of 3.3V.In this case, operating this signal switch at 85°C is acceptable.It is recommended that the minimal operating temperature of the multiplexer be maintained at -40°C.It is specified that the signal switches should operate at 3.6V as its maximum supply voltage.According to its specifications, the digital swith requires a minimum supply voltage of 3V.If the load is supplied with a voltage of 3mA, stability of the multiplexers can be maintained.
72V8980PVG8 Features
Supplied in the SSOP package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V
Operating with the supply current of 3mA
72V8980PVG8 Applications
There are a lot of Integrated Device Technology (IDT) 72V8980PVG8 Signal Switches / Multiplexers / Decoders applications.
- Paper plants
- Combinational circuit
- Video transmission
- D/A converters
- Data bus control
- Enabling different functions units in microprocessor instruction decoding
- A robotic vehicle with the metal detector
- GLAN
- War field flying robot with a night vision flying camera
- A/D converters
