72V8985JG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 44 |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Other Telecom ICs |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Pin Count | 44 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Power Dissipation-Max | 1W |
| Number of Ports | 8 |
| Nominal Supply Current | 3mA |
| Supply Type | Single |
| Telecom IC Type | DIGITAL TIME SWITCH |
| Independent Circuits | 1 |
| Height Seated (Max) | 4.57mm |
| Length | 16.51mm |
| Width | 16.51mm |
| Thickness | 3.63mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72V8985JG Overview
Due to the lack of space on the board, digital switch is provided in the PLCC.As parts of its basic configuration, 44 terminations are desgined.In multiplexer's system, 3.3V is the voltage supplied.A component pin count of 44 is found on this turn signal switch.Conductors terminate at J BEND in this design.There is a supply type of Single employed as part of this supply.The board is configured with 44 pins.This unit is mounted in the way of Surface Mount.The digital switch ic is an electronic part classified into Other Telecom ICs.Using a supply voltage of 3.3V can result in reliable performance of the multiplexers.This signal switching operates at a resistance of 8.The signal switch can operate at a maximum temperature of 85°C.It is recommended that the minimum operating temperature of the multiplexer be kept at -40°C.The relevant device specification specifies a maximum supply voltage of 3.6V for the signal switches.The digital swith is specified to operate at the minimum supply voltage of 3V in compliance with the applicable device specification.
72V8985JG Features
Supplied in the PLCC package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V
72V8985JG Applications
There are a lot of Integrated Device Technology (IDT) 72V8985JG Signal Switches / Multiplexers / Decoders applications.
- Metal detectors
- A/D converters
- Code converters
- Data-routing applications
- Data bus control
- Combinational circuit
- Signal router
- Enabling different rows of memory depending on address in memory chips
- Decimal decoder
- Robotic vehicles
