74ABT16273DL,112
| Parameters | |
|---|---|
| Package / Case | 48-BSSOP (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| Type | D-Type |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Subcategory | FF/Latches |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74ABT16273 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Clock Frequency | 240MHz |
| Family | ABT |
| Current - Quiescent (Iq) | 1mA |
| Current - Output High, Low | 32mA 64mA |
| Output Polarity | TRUE |
| Max I(ol) | 0.064 A |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 3.4ns @ 5V, 50pF |
| Prop. Delay@Nom-Sup | 4 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Propagation Delay (tpd) | 4 ns |
| Max Frequency@Nom-Sup | 150000000Hz |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Mounting Type | Surface Mount |
74ABT16273DL,112 Overview
48-BSSOP (0.295, 7.50mm Width)is the way it is packaged. Package Tubeembeds it. In the configuration, Non-Invertedis used as the output. Positive Edgeis the trigger it is configured with. Surface Mountis in the way of this electric part. A 4.5V~5.5Vsupply voltage is required for it to operate. Currently, the operating temperature is -40°C~85°C TA. This electronic flip flop is of type D-Type. It belongs to the 74ABTseries of FPGAs. This D flip flop should not have a frequency greater than 240MHz. The element count is 2 . It consumes 1mA of quiescent current without being affected by external factors. In 48terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. It is a member of the 74ABT16273 family. It is powered from a supply voltage of 5V. JK flip flop input capacitance is 4pF farads. It is a member of the ABTfamily of D flip flop. The part is included in FF/Latches. The maximal supply voltage (Vsup) reaches 5.5V. The supply voltage (Vsup) should be kept above 4.5V for normal operation. The power supply is 5V.
74ABT16273DL,112 Features
Tube package
74ABT series
5V power supplies
74ABT16273DL,112 Applications
There are a lot of NXP USA Inc. 74ABT16273DL,112 Flip Flops applications.
- ESCC
- 2 – Bit synchronous counter
- Automotive
- Shift Registers
- Pattern generators
- Balanced 24 mA output drivers
- Instrumentation
- Frequency division
- ESD protection
- Single Up Count-Control Line
