banner_page

74ABT16373CMTD

D-Type, Latch 4.5V~5.5V 16 Bits Tri-State Latches 74ABT Series 74ABT16373 48-TFSOP (0.240, 6.10mm Width)


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-74ABT16373CMTD
  • Package: 48-TFSOP (0.240, 6.10mm Width)
  • Datasheet: PDF
  • Stock: 632
  • Description: D-Type, Latch 4.5V~5.5V 16 Bits Tri-State Latches 74ABT Series 74ABT16373 48-TFSOP (0.240, 6.10mm Width)(Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 48-TFSOP (0.240, 6.10mm Width)
Number of Pins 48
Supplier Device Package 48-TSSOP
Operating Temperature -40°C~85°C
Packaging Tube
Series 74ABT
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Voltage - Supply 4.5V~5.5V
Base Part Number 74ABT16373
Output Type Tri-State
Operating Supply Voltage 5V
Number of Elements 2
Circuit 8:8
Polarity Non-Inverting
Number of Circuits 2
Max Supply Voltage 5.5V
Min Supply Voltage 4.5V
Nominal Supply Current 62mA
Number of Bits 16
Propagation Delay 5.6 ns
Turn On Delay Time 1.4 ns
Logic Function D-Type, Latch
Current - Output High, Low 32mA 64mA
Logic Type D-Type Transparent Latch
High Level Output Current -32mA
Low Level Output Current 64mA
Number of Input Lines 2
Independent Circuits 2
Number of Output Lines 3
Delay Time - Propagation 1.4ns
RoHS Status RoHS Compliant
Lead Free Lead Free

74ABT16373CMTD Overview


There is an embedded version of it in package 48-TFSOP (0.240, 6.10mm Width). This package has the format of Tube. It uses Tri-State as its output configuration. There is D-Type Transparent Latch logic type for this electrical device. The electronic component is mounted according to the Surface Mount method. A voltage of 4.5V~5.5V is used as the supply voltage for this device. A temperature of -40°C~85°C is set as the operating temperature. An FPGA of this type belongs to the 74ABT series. 16 Bits are used in the design of this electronic part. 74ABT16373 is the family name of it. With the design of the board, there are only 48 pins. The electronic part is mounted using the Surface Mount method. Electronic circuits comprise 2 input lines. A high level of efficiency is achieved by maintaining the supply voltage at 5V. Regardless of the input line, the binary equivalent of the input line will be generated by the 3 output lines. 2 elements are present in it. 2 circuits are used to achieve superior flexibility. The low level output current is set to 64mA. In the high level output current, the value is set to -32mA. Lower than 85°C is the ideal operating temperature. It is recommended that the operating temperature be higher than -40°C. 5.5V is the maximum voltage it supports. With a voltage of 4.5V, it operates at its minimum capacity.

74ABT16373CMTD Features


48-TFSOP (0.240, 6.10mm Width) package
74ABT series
16 Bits
74ABT16373 family
48 pins
2 elements

74ABT16373CMTD Applications


There are a lot of ON Semiconductor 74ABT16373CMTD Latches applications.

  • Shift register
  • Buffer/Storage Registers
  • Decade counting 7-segment decimal display
  • Shift left with parallel loading
  • Double bus register system
  • Automotive Cluster
  • BCD counting
  • Digital bus buffer
  • High-speed logic
  • Address register

Write a review

Note: HTML is not translated!
    Bad           Good