74ABT16373CMTDX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 48 |
| Supplier Device Package | 48-TSSOP |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ABT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 4.5V~5.5V |
| Base Part Number | 74ABT16373 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Number of Circuits | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 62mA |
| Number of Bits | 16 |
| Propagation Delay | 5.6 ns |
| Turn On Delay Time | 1.4 ns |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | D-Type Transparent Latch |
| High Level Output Current | -32mA |
| Low Level Output Current | 32mA |
| Number of Input Lines | 2 |
| Independent Circuits | 2 |
| Number of Output Lines | 3 |
| Delay Time - Propagation | 1.4ns |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74ABT16373CMTDX Overview
The package in which it is embedded is named 48-TFSOP (0.240, 6.10mm Width). This package has the format of Tape & Reel (TR). The output it is configured with uses Tri-State. There is a logic type of D-Type Transparent Latch associated with this electrical device. Mounting this electronic component follows the Surface Mount method. It operates with a supply voltage of 4.5V~5.5V. The temperature at which the machine is operating is -40°C~85°C. In the 74ABT series, this FPGA is located. It is designed with 16 bits. As a member of the 74ABT16373 family, it falls under that category. The device has 48 pins. The electronic part is mounted using the Surface Mount method. There are electronic circuits attached to the 2 input lines. In order to achieve high efficiency, the supply voltage should be kept at 5V. There are 3 output lines that correspond to the binary equivalents of the input line. The element count is 2. To achieve its exceptional flexibility, it relies on 2 circuits. There is 32mA low level output current set. It is set to zero for the high level output current. Operating temperatures should be below 85°C. It is recommended that the operating temperature be higher than -40°C. There is a maximum voltage supply of 5.5V that can be applied to it. A voltage of 4.5V is the minimum supply voltage required for it to operate.
74ABT16373CMTDX Features
48-TFSOP (0.240, 6.10mm Width) package
74ABT series
16 Bits
74ABT16373 family
48 pins
2 elements
74ABT16373CMTDX Applications
There are a lot of ON Semiconductor 74ABT16373CMTDX Latches applications.
- Network Switches
- Shift right with parallel loading
- BCD counting
- Parallel Output
- Automotive Body Electronics
- Motor Drives
- Automatic test equipment
- Pattern Generators
- Storage
- Multi-line decoders
