74ABT16373CSSC
| Parameters | |
|---|---|
| Base Part Number | 74ABT16373 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Number of Circuits | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 62mA |
| Number of Bits | 16 |
| Propagation Delay | 5.6 ns |
| Turn On Delay Time | 1.4 ns |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | D-Type Transparent Latch |
| High Level Output Current | -32mA |
| Low Level Output Current | 32mA |
| Number of Input Lines | 2 |
| Independent Circuits | 2 |
| Number of Output Lines | 3 |
| Delay Time - Propagation | 1.4ns |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 48 |
| Supplier Device Package | 48-SSOP |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74ABT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 4.5V~5.5V |
74ABT16373CSSC Overview
There is an embedded version of it in package 48-BSSOP (0.295, 7.50mm Width). It is packaged in the way of Tube. It uses Tri-State as the output. There is a logic type of D-Type Transparent Latch for this electrical device. Electronic components are mounted using the Surface Mount method. A 4.5V~5.5V supply voltage is required to operate it. During operation, the temperature is set at -40°C~85°C. The 74ABT series of FPGAs is the one this FPGA belongs to. There are 16 bits in this electronic part. It belongs to 74ABT16373 family. Designed with 48 pins, it is compatible with a wide range of devices. Electronic parts are mounted using the Surface Mount method. In the circuit, there are 2 input lines that are constituted by an electronic circuit. The supply voltage should be maintained at 5V for high efficiency. The binary equivalent of the input line is generated by 3 output lines. This element consists of 2. 2 circuits are used to achieve superior flexibility. 32mA is the low level output current. -32mA represents the high level output current. There should be a temperature below 85°C at which the system is operating. -40°C is the minimum operating temperature. 5.5V is the maximum voltage it supports. A voltage of 4.5V is the minimum supply voltage required for it to operate.
74ABT16373CSSC Features
48-BSSOP (0.295, 7.50mm Width) package
74ABT series
16 Bits
74ABT16373 family
48 pins
2 elements
74ABT16373CSSC Applications
There are a lot of ON Semiconductor 74ABT16373CSSC Latches applications.
- Parallel Output
- Programmable binary
- Hammer
- Relay replacement
- Relay
- Automotive HEV/EV Powertrain
- Bus system register with enable parallel lines at bus side
- Pattern Generators
- Parallel-to-Serial Data Conversion
- Motor Drives
