74ABT16600DGGRE4
| Parameters | |
|---|---|
| Logic Type | Universal Bus Transceiver |
| Power Supply Current-Max (ICC) | 36mA |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| Width | 6.1mm |
| RoHS Status | ROHS3 Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 56 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Additional Feature | WITH INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION; WITH CLOCK ENABLE |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ABT16600 |
| Pin Count | 56 |
| Qualification Status | Not Qualified |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Circuits | 18-Bit |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 18 |
| Propagation Delay | 4.7 ns |
| Family | ABT |
| Logic Function | Transceiver |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
74ABT16600DGGRE4 Overview
As part of the 56-TFSOP (0.240, 6.10mm Width) package, it is embedded. I have packaged it in a way that is similar to Tape & Reel (TR)'s. 18-Bit circuits are used to achieve its superior flexibility. The Logic type of this electrical device is Universal Bus Transceiver. A Surface Mount-shaped electronic component is mounted here. It is better to have an operating temperature higher than -40°C~85°C. The High/Low output current of 32mA 64mA makes it feature maximum design flexibility. It is a type of FPGA belonging to the 74ABT series. There is a supply voltage of 4.5V~5.5V that it operates on. 74ABT16600 family is the family in which it belongs. It can be said that there is a technique of terminating transmission lines that uses a device that matches the characteristics of the line impedance, called 56 terminations. The supply voltage should be kept above 5V for normal operation. The 56 pin count is provided. Electronic parts such as this one are designed with 18 Bits. Termination with a 2 termination matches the characteristic impedance of the transmission line. It is mounted in the way of Surface Mount so that this electronic part can be seen. A 56-pin is used in this design. Devices in this family are known as ABT devices. When Vsup reaches 5.5V, the maximum supply voltage has been reached. A higher supply voltage (Vsup) should be used than the lower supply voltage (4.5V). Moreover, it is characterized by WITH INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION; WITH CLOCK ENABLE as well.
74ABT16600DGGRE4 Features
56-TFSOP (0.240, 6.10mm Width) package
74ABT series
74ABT16600 family
56 pin count
56 pins
74ABT16600DGGRE4 Applications
There are a lot of Texas Instruments 74ABT16600DGGRE4 Universal Bus Functions applications.
- Electricity for military and civilian life in areas without electricity
- Circuits involving computation and processing
- Projector
- Small ground power station
- Microcontrollers
- Printer IC
- Game console
- In-vehicle system
- Alarm circuit using LDR
- Disk read-write IC
