74ABT16823ADL,512
| Parameters | |
|---|---|
| Subcategory | FF/Latches |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74ABT16823 |
| JESD-30 Code | R-PDSO-G56 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Clock Frequency | 190MHz |
| Family | ABT |
| Current - Quiescent (Iq) | 1mA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Output Polarity | TRUE |
| Max I(ol) | 0.064 A |
| Number of Bits per Element | 9 |
| Max Propagation Delay @ V, Max CL | 3.2ns @ 5V, 50pF |
| Prop. Delay@Nom-Sup | 3.7 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Propagation Delay (tpd) | 3.7 ns |
| Max Frequency@Nom-Sup | 140000000Hz |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Type | D-Type |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Additional Feature | WITH CLEAR AND CLOCK ENABLE |
74ABT16823ADL,512 Overview
56-BSSOP (0.295, 7.50mm Width)is the packaging method. It is contained within the Tubepackage. T flip flop is configured with an output of Tri-State, Non-Inverted. It is configured with the trigger Positive Edge. The electronic part is mounted in the way of Surface Mount. A supply voltage of 4.5V~5.5V is required for operation. A temperature of -40°C~85°C TAis used in the operation. D-Typedescribes this flip flop. In terms of FPGAs, it belongs to the 74ABT series. A frequency of 190MHzshould be the maximum output frequency. A total of 2 elements are present. As a result, it consumes 1mA of quiescent current without being affected by external factors. There are 56 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. JK flip flop belongs to 74ABT16823 family. It is powered from a supply voltage of 5V. Its input capacitance is 4pFfarads. ABTis the family of this D flip flop. It is included in FF/Latches. It reaches 5.5Vwhen the maximum supply voltage (Vsup) is applied. A normal operating voltage (Vsup) should remain above 4.5V. The D latch operates on 5V volts. This flip flop has a total of 2ports. It is also characterized by WITH CLEAR AND CLOCK ENABLE.
74ABT16823ADL,512 Features
Tube package
74ABT series
5V power supplies
74ABT16823ADL,512 Applications
There are a lot of NXP USA Inc. 74ABT16823ADL,512 Flip Flops applications.
- Bus hold
- Computers
- Parallel data storage
- Test & Measurement
- Control circuits
- ESCC
- Circuit Design
- Consumer
- Count Modes
- ESD performance
