74ABT16823ADL,518
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Type | D-Type |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Additional Feature | WITH CLEAR AND CLOCK ENABLE |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74ABT16823 |
| JESD-30 Code | R-PDSO-G56 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Clock Frequency | 190MHz |
| Family | ABT |
| Current - Quiescent (Iq) | 1mA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Output Polarity | TRUE |
| Max I(ol) | 0.064 A |
| Number of Bits per Element | 9 |
| Max Propagation Delay @ V, Max CL | 3.2ns @ 5V, 50pF |
| Prop. Delay@Nom-Sup | 3.7 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Propagation Delay (tpd) | 3.7 ns |
| Max Frequency@Nom-Sup | 140000000Hz |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
74ABT16823ADL,518 Overview
The package is in the form of 56-BSSOP (0.295, 7.50mm Width). As part of the package Tape & Reel (TR), it is embedded. There is a Tri-State, Non-Invertedoutput configured with it. It is configured with a trigger that uses Positive Edge. There is an electric part mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis required for its operation. A temperature of -40°C~85°C TAis considered to be the operating temperature. This electronic flip flop is of type D-Type. JK flip flop is a part of the 74ABTseries of FPGAs. Its output frequency should not exceed 190MHz Hz. A total of 2 elements are present. It consumes 1mA of quiescent In 56terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. The object belongs to the 74ABT16823 family. Power is provided by a 5V supply. A JK flip flop with a 4pFfarad input capacitance is used here. In this case, the D flip flop belongs to the ABTfamily. There is a base part number FF/Latchesfor the RS flip flops. It reaches 5.5Vwhen the maximum supply voltage (Vsup) is applied. Normal operation requires a supply voltage (Vsup) above 4.5V. Considering its reliability, this T flip flop is well suited for TAPE AND REEL. The system runs on a power supply of 5V watts. The flip flop has 2embedded ports. Additionally, there are WITH CLEAR AND CLOCK ENABLE on the electronic flip flop that can be referred to.
74ABT16823ADL,518 Features
Tape & Reel (TR) package
74ABT series
5V power supplies
74ABT16823ADL,518 Applications
There are a lot of NXP USA Inc. 74ABT16823ADL,518 Flip Flops applications.
- Pattern generators
- Guaranteed simultaneous switching noise level
- Memory
- Parallel data storage
- QML qualified product
- Balanced 24 mA output drivers
- Safety Clamp
- Control circuits
- Power down protection
- Common Clocks
