74ABT16841ADL,512
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Subcategory | FF/Latches |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74ABT16841 |
| Pin Count | 56 |
| JESD-30 Code | R-PDSO-G56 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 10:10 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 10 |
| Family | ABT |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Output Polarity | TRUE |
| Max I(ol) | 0.064 A |
| Prop. Delay@Nom-Sup | 4.9 ns |
| Power Supply Current-Max (ICC) | 19mA |
| Independent Circuits | 2 |
| Delay Time - Propagation | 2.2ns |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
74ABT16841ADL,512 Overview
A package called 56-BSSOP (0.295, 7.50mm Width) contains it. This package has the format of Tube. In its configuration, Tri-State is used as the output. D-Type Transparent Latch is the logic type of this electrical device. The electronic component is mounted according to the Surface Mount method. It operates with a supply voltage of 4.5V~5.5V. There is -40°C~85°C operating temperature. It is a type of FPGA belonging to the 74ABT series. It is designed with 10 bits. This device is designed with 56 terminations. This type belongs to the 74ABT16841 family. With the supply voltage set at 5V, it is able to operate. With 56 pins, it is equipped. In the world of electronics, this electronic device belongs to the family of ABT. This device has 2 ports that can be connected to it. This part is included in FF/Latches. 5.5V is the maximum voltage (Vsup) that can be supplied. A total of 5V power supplies are needed to run it. There should be a voltage supply (Vsup) greater than 4.5V. A maximal power current (ICC) is generated for its operation at 19mA.
74ABT16841ADL,512 Features
56-BSSOP (0.295, 7.50mm Width) package
74ABT series
10 Bits
74ABT16841 family
56 pin count
5V power supplies
74ABT16841ADL,512 Applications
There are a lot of NXP USA Inc. 74ABT16841ADL,512 Latches applications.
- Parallel data synchronization
- Programmable binary
- Relay replacement
- Decade counting 7-segment decimal display
- Counters
- Data acquisition
- Display driver
- Up-Down Johnson
- A/D and D/A conversion
- Serial Input
