74ABT16843DGGRE4
| Parameters | |
|---|---|
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Power Supply Current-Max (ICC) | 85mA |
| Independent Circuits | 2 |
| Number of Output Lines | 18 |
| Length | 14mm |
| Width | 6.1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 56 |
| Weight | 252.792698mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Additional Feature | WITH CLEAR AND PRESET |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74ABT16843 |
| Pin Count | 56 |
| Output Type | Tri-State |
| Circuit | 9:9 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 9 |
| Propagation Delay | 4.2 ns |
| Turn On Delay Time | 3.1 ns |
| Family | ABT |
| Logic Function | D-Type, Latch |
74ABT16843DGGRE4 Overview
It is embedded in the 56-TFSOP (0.240, 6.10mm Width) package. Tape & Reel (TR) is the packaging method. The output it is configured with uses Tri-State. This electrical device has the logic type D-Type Transparent Latch. Electronic components are mounted using the Surface Mount method. A 4.5V~5.5V voltage supply is required for operation. A temperature of -40°C~85°C is used for operation. The 74ABT series contains FPGAs of this type. 9 Bits are used in the design of this electronic part. The device consists of 56 terminations that are designed to be used in conjunction with it. It belongs to 74ABT16843 family. The device works with a voltage of 5V for its supply voltage. There are 56 pins attached to it. There is a device in this electronic family called ABT. With the design of the board, there are only 56 pins. This electronic part is mounted in the way of Surface Mount. In this device, there are 2 ports. It reaches 5.5V when the supply voltage (Vsup) reaches maximum. It is recommended to have a higher supply voltage (Vsup) than 4.5V. Due to its 64mA output current, it offers maximum design flexibility. 18 output lines generate the binary equivalent of the input lines. It is also characterized by WITH CLEAR AND PRESET. In order for the device to operate at its maximum power, the maximum power current (ICC) of 85mA is needed for operation.
74ABT16843DGGRE4 Features
56-TFSOP (0.240, 6.10mm Width) package
74ABT series
9 Bits
74ABT16843 family
56 pin count
56 pins
74ABT16843DGGRE4 Applications
There are a lot of Texas Instruments 74ABT16843DGGRE4 Latches applications.
- Relay
- Clocks
- OC-48 communication systems
- Pseudo-random code generators
- Multistage ripple counting
- Synchronous frequency dividers
- A/D converters
- Meter applications
- Serial Output Data Queuing
- Four-bit storage with output enable
