74ABT273AD,112
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1997 |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Subcategory | FF/Latches |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74ABT273 |
| JESD-30 Code | R-PDSO-G20 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Clock Frequency | 350MHz |
| Family | ABT |
| Current - Quiescent (Iq) | 250μA |
| Current - Output High, Low | 32mA 64mA |
| Output Polarity | TRUE |
| Max I(ol) | 0.064 A |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 4.6ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Power Supply Current-Max (ICC) | 30mA |
| fmax-Min | 250 MHz |
| Max Frequency@Nom-Sup | 250000000Hz |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
74ABT273AD,112 Overview
20-SOIC (0.295, 7.50mm Width)is the packaging method. You can find it in the Tubepackage. In the configuration, Non-Invertedis used as the output. Positive Edgeis the trigger it is configured with. Surface Mountis in the way of this electric part. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. In this case, the operating temperature is -40°C~85°C TA. This D latch has the type D-Type. The FPGA belongs to the 74ABT series. It should not exceed 350MHzin its output frequency. D latch consists of 1 elements. It consumes 250μA of quiescent current without being affected by external factors. The number of terminations is 20. It is a member of the 74ABT273 family. An input voltage of 5Vpowers the D latch. There is 3.5pF input capacitance for this T flip flop. Electronic devices of this type belong to the ABTfamily. This part is included in FF/Latches. It reaches the maximum supply voltage (Vsup) at 5.5V. Normally, the supply voltage (Vsup) should be kept above 4.5V. It operates from 5V power supplies.
74ABT273AD,112 Features
Tube package
74ABT series
5V power supplies
74ABT273AD,112 Applications
There are a lot of NXP USA Inc. 74ABT273AD,112 Flip Flops applications.
- Control circuits
- Pattern generators
- Dynamic threshold performance
- Storage registers
- Safety Clamp
- CMOS Process
- Convert a momentary switch to a toggle switch
- Common Clocks
- Automotive
- Bounce elimination switch
