74ABT273ADB,112
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Subcategory | FF/Latches |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74ABT273 |
| JESD-30 Code | R-PDSO-G20 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Clock Frequency | 350MHz |
| Family | ABT |
| Current - Quiescent (Iq) | 250μA |
| Current - Output High, Low | 32mA 64mA |
| Output Polarity | TRUE |
| Max I(ol) | 0.064 A |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 4.6ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Power Supply Current-Max (ICC) | 30mA |
| fmax-Min | 250 MHz |
| Max Frequency@Nom-Sup | 250000000Hz |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
74ABT273ADB,112 Overview
The package is in the form of 20-SSOP (0.209, 5.30mm Width). As part of the package Tube, it is embedded. Currently, the output is configured to use Non-Inverted. In the configuration of the trigger, Positive Edgeis used. Surface Mountis occupied by this electronic component. The supply voltage is set to 4.5V~5.5V. It is operating at a temperature of -40°C~85°C TA. This electronic flip flop is of type D-Type. JK flip flop is a part of the 74ABTseries of FPGAs. You should not exceed 350MHzin the output frequency of the device. The element count is 1 . This process consumes 250μA quiescents. The number of terminations is 20. The 74ABT273 family contains this object. A voltage of 5V provides power to the D latch. A JK flip flop with a 3.5pFfarad input capacitance is used here. This D flip flop belongs to the family of ABT. It is part of the FF/Latchesbase part number family. As soon as Vsup reaches 5.5V, the maximum supply voltage is reached. Keeping the supply voltage (Vsup) above 4.5V is necessary for normal operation. The system runs on a power supply of 5V watts.
74ABT273ADB,112 Features
Tube package
74ABT series
5V power supplies
74ABT273ADB,112 Applications
There are a lot of NXP USA Inc. 74ABT273ADB,112 Flip Flops applications.
- Latch-up performance
- Memory
- QML qualified product
- Synchronous counter
- Balanced 24 mA output drivers
- Single Down Count-Control Line
- Counters
- Data transfer
- Patented noise
- Modulo – n – counter
