74ABT273APW,118
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74ABT273 |
| JESD-30 Code | R-PDSO-G20 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Clock Frequency | 350MHz |
| Family | ABT |
| Current - Quiescent (Iq) | 250μA |
| Current - Output High, Low | 32mA 64mA |
| Output Polarity | TRUE |
| Max I(ol) | 0.064 A |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 4.6ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Power Supply Current-Max (ICC) | 30mA |
| fmax-Min | 250 MHz |
| Max Frequency@Nom-Sup | 250000000Hz |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
74ABT273APW,118 Overview
The package is in the form of 20-TSSOP (0.173, 4.40mm Width). You can find it in the Tape & Reel (TR)package. Non-Invertedis the output configured for it. The trigger it is configured with uses Positive Edge. It is mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis required for its operation. In this case, the operating temperature is -40°C~85°C TA. D-Typeis the type of this D latch. In FPGA terms, D flip flop is a type of 74ABTseries FPGA. In order for it to function properly, its output frequency should not exceed 350MHz. In total, it contains 1 elements. There is 250μA quiescent consumption. Terminations are 20. If you search by 74ABT273, you will find similar parts. The power supply voltage is 5V. Input capacitance of this device is 3.5pF farads. It is a member of the ABTfamily of D flip flop. This RS flip flops is a part number FF/Latches. It reaches the maximum supply voltage (Vsup) at 5.5V. The supply voltage (Vsup) should be maintained above 4.5V for normal operation. Considering the reliability of this T flip flop, it is well suited for TAPE AND REEL. It operates from 5V power supplies.
74ABT273APW,118 Features
Tape & Reel (TR) package
74ABT series
5V power supplies
74ABT273APW,118 Applications
There are a lot of NXP USA Inc. 74ABT273APW,118 Flip Flops applications.
- Latch-up performance
- Balanced 24 mA output drivers
- Storage registers
- Cold spare funcion
- Circuit Design
- Consumer
- Load Control
- ESCC
- Single Up Count-Control Line
- Event Detectors
