74ABT273CMSA
| Parameters | |
|---|---|
| High Level Output Current | -32mA |
| Input Capacitance | 5pF |
| Low Level Output Current | 64mA |
| Number of Input Lines | 3 |
| Number of Output Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Supplier Device Package | 20-SSOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ABT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 4.5V~5.5V |
| Frequency | 200MHz |
| Base Part Number | 74ABT273 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 8 |
| Clock Frequency | 200MHz |
| Propagation Delay | 6.8 ns |
| Turn On Delay Time | 6 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 50μA |
| Current - Output High, Low | 32mA 64mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 6.8ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
74ABT273CMSA Overview
As a result, it is packaged as 20-SSOP (0.209, 5.30mm Width). There is an embedded version in the package Tube. Non-Invertedis the output configured for it. Positive Edgeis the trigger it is configured with. This electronic part is mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. A temperature of -40°C~85°C TAis used in the operation. It belongs to the type D-Typeof flip flops. JK flip flop belongs to the 74ABTseries of FPGAs. It should not exceed 200MHzin terms of its output frequency. D latch consists of 1 elements. T flip flop consumes 50μA quiescent energy. You can search similar parts based on 74ABT273. A 5pFfarad input capacitance is provided by this T flip flop. A part of the electronic system is mounted in the way of Surface Mount. 20pins are included in its design. This device's clock edge trigger type is Positive Edge. An electronic part with 8bits has been designed. Using 8 circuits, it is highly flexible. For high efficiency, the supply voltage should be set to 5V. It has 8 output lines to operate. It has 3lines. A high level output current of -32mAis set. 64mA is the low level output current. Temperatures below 85°Care ideal for operating. It is recommended that the operating temperature is higher than -40°C. Despite its minimal supply voltage of 4.5V, it is capable of operating. It supports the maximal supply voltage of 5.5V. This frequency can be achieved 200MHz.
74ABT273CMSA Features
Tube package
74ABT series
20 pins
8 Bits
74ABT273CMSA Applications
There are a lot of ON Semiconductor 74ABT273CMSA Flip Flops applications.
- Clock pulse
- Data transfer
- Supports Live Insertion
- Storage Registers
- Frequency Dividers
- Latch-up performance
- Frequency division
- Matched Rise and Fall
- Storage registers
- ESD protection
