74ABT273CMSAX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Supplier Device Package | 20-SSOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ABT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 4.5V~5.5V |
| Frequency | 200MHz |
| Base Part Number | 74ABT273 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 8 |
| Clock Frequency | 200MHz |
| Propagation Delay | 6.8 ns |
| Turn On Delay Time | 6 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 50μA |
| Current - Output High, Low | 32mA 64mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 6.8ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -32mA |
| Input Capacitance | 5pF |
| Low Level Output Current | 64mA |
| Number of Input Lines | 3 |
| Number of Output Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74ABT273CMSAX Overview
The flip flop is packaged in 20-SSOP (0.209, 5.30mm Width). It is included in the package Tape & Reel (TR). Currently, the output is configured to use Non-Inverted. The trigger configured with it uses Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. The JK flip flop operates at 4.5V~5.5Vvolts. The operating temperature is -40°C~85°C TA. This electronic flip flop is of type D-Type. The FPGA belongs to the 74ABT series. Its output frequency should not exceed 200MHz Hz. The list contains 1 elements. During its operation, it consumes 50μA quiescent energy. Members of the 74ABT273family make up this object. This JK flip flop has a 5pFfarad input capacitance. This electronic part is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 20. Its clock edge trigger type is Positive Edge. There are 8bits in this flip flop. Its superior flexibility is attributed to its use of 8 circuits. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. There are 8 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. It has 3lines. -32mA is set as the high level output current. A 64mAvalue is set for low-level output current. If the operating temperature is lower than 85°C, it is recommended. It is recommended that the operating temperature is higher than -40°C. The system operates with a minimum supply voltage of 4.5V. A maximum voltage of 5.5V can be provided by it. 200MHzis the maximum frequency that can be achieved.
74ABT273CMSAX Features
Tape & Reel (TR) package
74ABT series
20 pins
8 Bits
74ABT273CMSAX Applications
There are a lot of ON Semiconductor 74ABT273CMSAX Flip Flops applications.
- Differential Individual
- Computers
- Test & Measurement
- QML qualified product
- Data transfer
- Event Detectors
- Digital electronics systems
- Buffered Clock
- Control circuits
- Automotive
