74ABT273CMTC
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Supplier Device Package | 20-TSSOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ABT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 4.5V~5.5V |
| Frequency | 200MHz |
| Base Part Number | 74ABT273 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 8 |
| Clock Frequency | 200MHz |
| Propagation Delay | 6.8 ns |
| Turn On Delay Time | 6 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 50μA |
| Current - Output High, Low | 32mA 64mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 6.8ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -32mA |
| Input Capacitance | 5pF |
| Low Level Output Current | 64mA |
| Number of Input Lines | 3 |
| Number of Output Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74ABT273CMTC Overview
The item is packaged in 20-TSSOP (0.173, 4.40mm Width)cases. As part of the package Tube, it is embedded. T flip flop uses Non-Invertedas its output configuration. The trigger configured with it uses Positive Edge. It is mounted in the way of Surface Mount. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. It is at -40°C~85°C TAdegrees Celsius that the system is operating. D-Typedescribes this flip flop. JK flip flop belongs to the 74ABTseries of FPGAs. You should not exceed 200MHzin its output frequency. D latch consists of 1 elements. It consumes 50μA of quiescent D latch belongs to the 74ABT273 family. A 5pFfarad input capacitance is provided by this T flip flop. A part of the electronic system is mounted in the way of Surface Mount. There are 20pins on it. There is a clock edge trigger type of Positive Edgeon this device. The flip flop is designed with 8bits. Using 8 circuits, it is highly flexible. Optimal efficiency requires a supply voltage of 5V. There are 8 output lines in this JK flip flop. It is reported that there are 3 input lines. In this case, the high level output current is set to -32mA. In the low level output current setting, 64mAis used. It is recommended that the operating temperature be lower than 85°C. A temperature above -40°Cshould be used for the operation. The system operates with a minimum supply voltage of 4.5V. It is capable of supporting a maximum supply voltage of 5.5V. This frequency can be achieved at 200MHz.
74ABT273CMTC Features
Tube package
74ABT series
20 pins
8 Bits
74ABT273CMTC Applications
There are a lot of ON Semiconductor 74ABT273CMTC Flip Flops applications.
- Computing
- Dynamic threshold performance
- Safety Clamp
- Functionally equivalent to the MC10/100EL29
- Consumer
- Parallel data storage
- Counters
- EMI reduction circuitry
- ATE
- Test & Measurement
