74ABT273CSCX
| Parameters | |
|---|---|
| Supplier Device Package | 20-SOIC |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ABT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 4.5V~5.5V |
| Frequency | 200MHz |
| Base Part Number | 74ABT273 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 8 |
| Clock Frequency | 200MHz |
| Propagation Delay | 6.8 ns |
| Turn On Delay Time | 6 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 50μA |
| Current - Output High, Low | 32mA 64mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 6.8ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -32mA |
| Input Capacitance | 5pF |
| Low Level Output Current | 64mA |
| Number of Input Lines | 3 |
| Number of Output Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
74ABT273CSCX Overview
In the form of 20-SOIC (0.295, 7.50mm Width), it has been packaged. D flip flop is embedded in the Tape & Reel (TR) package. The output it is configured with uses Non-Inverted. JK flip flop uses Positive Edgeas the trigger. It is mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis used as the supply voltage. A temperature of -40°C~85°C TAis used in the operation. It is an electronic flip flop with the type D-Type. It belongs to the 74ABTseries of FPGAs. This D flip flop should not have a frequency greater than 200MHz. D latch consists of 1 elements. It consumes 50μA of quiescent current without being affected by external factors. The 74ABT273family includes it. Its input capacitance is 5pF farads. There is an electronic part that is mounted in the way of Surface Mount. There are 20pins on it. This device has the clock edge trigger type of Positive Edge. There are 8bits in its design. Using 8 circuits, it is highly flexible. Optimal efficiency requires a supply voltage of 5V. It has 8 output lines to operate. The number of input lines is 3. High level output current is set to -32mA. 64mAis set as the low level output current. It is recommended that the operating temperature be lower than 85°C. It should be higher than -40°Cwhen the system is operating. In order for it to operate, a supply voltage of 4.5Vis required. It is capable of supporting a maximum supply voltage of 5.5V. It is possible to obtain a frequency of 200MHz.
74ABT273CSCX Features
Tape & Reel (TR) package
74ABT series
20 pins
8 Bits
74ABT273CSCX Applications
There are a lot of ON Semiconductor 74ABT273CSCX Flip Flops applications.
- Cold spare funcion
- Data transfer
- Latch
- Dynamic threshold performance
- Memory
- Matched Rise and Fall
- Parallel data storage
- High Performance Logic for test systems
- Counters
- Reduced system switching noise
