74ABT373CMSA
| Parameters | |
|---|---|
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Supplier Device Package | 20-SSOP |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74ABT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 4.5V~5.5V |
| Base Part Number | 74ABT373 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 30mA |
| Number of Bits | 8 |
| Propagation Delay | 4.5 ns |
| Turn On Delay Time | 2.7 ns |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | D-Type Transparent Latch |
| High Level Output Current | -32mA |
| Low Level Output Current | 32mA |
| Number of Input Lines | 1 |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Delay Time - Propagation | 2.7ns |
74ABT373CMSA Overview
The package in which it is embedded is named 20-SSOP (0.209, 5.30mm Width). As a result, it has a packaging of Tube. It uses Tri-State as its output configuration. There is D-Type Transparent Latch logic type for this electrical device. This electronic part is mounted in the way of Surface Mount. There is no supply voltage for this device. The temperature at which the machine is operating is -40°C~85°C. The 74ABT series of FPGAs is the one this FPGA belongs to. It is designed with 8 bits. As a member of the 74ABT373 family, it falls under that category. This board has 20 pins on it, which is what it is designed for. Surface Mount is the way in which this electronic part is mounted. Electronic circuits are represented by 1 input lines. For maximum efficiency, the supply voltage should be set to 5V. 3 output lines provide binary equivalents of input lines. A total of 1 elements make up this object. 8 circuits are used to achieve superior flexibility. In the low level output current, the value is set to 32mA. It is set to zero for the high level output current. Lower than 85°C is the ideal operating temperature. It is recommended to operate at a temperature higher than -40°C. Voltages up to 5.5V can be supplied. In order for the machine to operate, the supply voltage must be 4.5V.
74ABT373CMSA Features
20-SSOP (0.209, 5.30mm Width) package
74ABT series
8 Bits
74ABT373 family
20 pins
1 elements
74ABT373CMSA Applications
There are a lot of ON Semiconductor 74ABT373CMSA Latches applications.
- Automotive HEV/EV Powertrain
- Frequency
- Parallel Input
- Accumulator Registers
- Digital bus buffer
- Up/down difference counting
- Bus system register with enable parallel lines at bus side
- Frequency dividing
- Parallel data storage
- PCs and Notebooks
