banner_page

74ABT373CSJ

D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74ABT Series 74ABT373 20-SOIC (0.209, 5.30mm Width)


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-74ABT373CSJ
  • Package: 20-SOIC (0.209, 5.30mm Width)
  • Datasheet: PDF
  • Stock: 655
  • Description: D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74ABT Series 74ABT373 20-SOIC (0.209, 5.30mm Width)(Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-SOIC (0.209, 5.30mm Width)
Number of Pins 20
Supplier Device Package 20-SOP
Operating Temperature -40°C~85°C
Packaging Tube
Series 74ABT
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Voltage - Supply 4.5V~5.5V
Base Part Number 74ABT373
Output Type Tri-State
Operating Supply Voltage 5V
Number of Elements 1
Circuit 8:8
Polarity Non-Inverting
Number of Circuits 8
Max Supply Voltage 5.5V
Min Supply Voltage 4.5V
Nominal Supply Current 30mA
Number of Bits 8
Propagation Delay 4.5 ns
Turn On Delay Time 2.7 ns
Logic Function D-Type, Latch
Current - Output High, Low 32mA 64mA
Logic Type D-Type Transparent Latch
High Level Output Current -32mA
Low Level Output Current 32mA
Number of Input Lines 1
Independent Circuits 1
Number of Output Lines 3
Delay Time - Propagation 2.7ns
RoHS Status RoHS Compliant
Lead Free Lead Free

74ABT373CSJ Overview


In the 20-SOIC (0.209, 5.30mm Width) package, it can be found as an embedded module. It is packaged in the way of Tube. It uses Tri-State as its output configuration. There is a logic type of D-Type Transparent Latch associated with this electrical device. Electronic parts are mounted in accordance with Surface Mount. It operates at a voltage of 4.5V~5.5V. It is -40°C~85°C at the operating temperature. This FPGA is part of the 74ABT series. The design of this electronic part contains 8 bits. As a member of the 74ABT373 family, it falls under that category. There are 20 pins on it. Mounting this electronic component follows the Surface Mount method. Input Lines consist of electronic circuits, and there are 1. A high efficiency supply voltage should be maintained at 5V. It follows that 3 output lines are generated from the binary equivalent of the input line. The element count is 1. 8 circuits are used to achieve superior flexibility. It is set to zero for the low level output current. -32mA is set as the high level output current. There should be a temperature below 85°C at which the system is operating. The operating temperature should be higher than -40°C. There is a maximum voltage supply of 5.5V that can be applied to it. The minimal voltage for operation is 4.5V.

74ABT373CSJ Features


20-SOIC (0.209, 5.30mm Width) package
74ABT series
8 Bits
74ABT373 family
20 pins
1 elements

74ABT373CSJ Applications


There are a lot of ON Semiconductor 74ABT373CSJ Latches applications.

  • Hammer Device Information
  • PCs and Notebooks
  • Digital bus buffer
  • Shift Registers
  • Frequency
  • Display
  • Serial Output Register
  • Instrumentation
  • TV Set-top Boxes
  • Serial Output Data Queuing

Write a review

Note: HTML is not translated!
    Bad           Good