74ABT374CSJ
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Supplier Device Package | 20-SOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ABT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 4.5V~5.5V |
| Frequency | 200MHz |
| Base Part Number | 74ABT374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 8 |
| Clock Frequency | 200MHz |
| Propagation Delay | 5 ns |
| Turn On Delay Time | 3.2 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 50μA |
| Current - Output High, Low | 32mA 64mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -32mA |
| Input Capacitance | 5pF |
| Low Level Output Current | 64mA |
| Number of Input Lines | 1 |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74ABT374CSJ Overview
20-SOIC (0.209, 5.30mm Width)is the packaging method. Package Tubeembeds it. In the configuration, Tri-State, Non-Invertedis used as the output. It is configured with a trigger that uses Positive Edge. The electronic part is mounted in the way of Surface Mount. With a supply voltage of 4.5V~5.5V volts, it operates. It is operating at a temperature of -40°C~85°C TA. This electronic flip flop is of type D-Type. It is a type of FPGA belonging to the 74ABT series. You should not exceed 200MHzin its output frequency. In total, it contains 1 elements. It consumes 50μA of quiescent current without being affected by external factors. D latch belongs to the 74ABT374 family. This JK flip flop has a 5pFfarad input capacitance. A part of the electronic system is mounted in the way of Surface Mount. 20pins are included in its design. This device has the clock edge trigger type of Positive Edge. This flip flop is designed with 8 Bits. The superior flexibility of this circuit is achieved by using 8 circuits. A high level of efficiency can be achieved by maintaining the supply voltage at 5V. There are 3 output lines in this JK flip flop. Currently, there are 1 lines of input. -32mAis the output current at high level. There is 64mA output current at the low level. Ideally, the operating temperature should be lower than 85°C. In order for the system to operate properly, the temperature should be higher than -40°C. It operates with the minimal supply voltage of 4.5V. It supports the maximal supply voltage of 5.5V. It is possible to obtain a frequency of 200MHz.
74ABT374CSJ Features
Tube package
74ABT series
20 pins
8 Bits
74ABT374CSJ Applications
There are a lot of ON Semiconductor 74ABT374CSJ Flip Flops applications.
- Bounce elimination switch
- Frequency division
- Circuit Design
- Communications
- Convert a momentary switch to a toggle switch
- Computing
- Event Detectors
- Shift registers
- Functionally equivalent to the MC10/100EL29
- Power down protection
