74ABT377AD,118
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Additional Feature | WITH HOLD MODE |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74ABT377 |
| JESD-30 Code | R-PDSO-G20 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Clock Frequency | 250MHz |
| Family | ABT |
| Current - Quiescent (Iq) | 250μA |
| Current - Output High, Low | 32mA 64mA |
| Output Polarity | TRUE |
| Max I(ol) | 0.064 A |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 3.6ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Propagation Delay (tpd) | 4.9 ns |
| Power Supply Current-Max (ICC) | 30mA |
| fmax-Min | 250 MHz |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
74ABT377AD,118 Overview
It is packaged in the way of 20-SOIC (0.295, 7.50mm Width). There is an embedded version in the package Tape & Reel (TR). Non-Invertedis the output configured for it. It is configured with a trigger that uses a value of Positive Edge. Surface Mountis occupied by this electronic component. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. A temperature of -40°C~85°C TAis considered to be the operating temperature. It belongs to the type D-Typeof flip flops. The FPGA belongs to the 74ABT series. It should not exceed 250MHzin its output frequency. A total of 1elements are present in it. As a result, it consumes 250μA of quiescent current without being affected by external factors. Terminations are 20. The 74ABT377 family contains this object. A voltage of 5V provides power to the D latch. Input capacitance of this device is 4pF farads. This D flip flop belongs to the family of ABT. This device has the base part number FF/Latches. It reaches 5.5Vwhen the maximum supply voltage (Vsup) is applied. It is imperative that the supply voltage (Vsup) is maintained above 4.5Vin order to ensure normal operation. As a result of its reliable performance, this T flip flop is suitable for TAPE AND REEL. The power supply is 5V. It is also characterized by WITH HOLD MODE.
74ABT377AD,118 Features
Tape & Reel (TR) package
74ABT series
5V power supplies
74ABT377AD,118 Applications
There are a lot of NXP USA Inc. 74ABT377AD,118 Flip Flops applications.
- Instrumentation
- Dynamic threshold performance
- Modulo – n – counter
- ESD performance
- Differential Individual
- Storage Registers
- Data transfer
- High Performance Logic for test systems
- Frequency division
- Count Modes
