74ABT377ADB,112
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Additional Feature | WITH HOLD MODE |
| Subcategory | FF/Latches |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74ABT377 |
| JESD-30 Code | R-PDSO-G20 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Clock Frequency | 250MHz |
| Family | ABT |
| Current - Quiescent (Iq) | 250μA |
| Current - Output High, Low | 32mA 64mA |
| Output Polarity | TRUE |
| Max I(ol) | 0.064 A |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 3.6ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Propagation Delay (tpd) | 4.9 ns |
| Power Supply Current-Max (ICC) | 30mA |
| fmax-Min | 250 MHz |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
74ABT377ADB,112 Overview
It is packaged in the way of 20-SSOP (0.209, 5.30mm Width). Package Tubeembeds it. There is a Non-Invertedoutput configured with it. The trigger it is configured with uses Positive Edge. Surface Mountis in the way of this electric part. A 4.5V~5.5Vsupply voltage is required for it to operate. It is operating at -40°C~85°C TA. The type of this D latch is D-Type. The 74ABTseries comprises this type of FPGA. A frequency of 250MHzshould not be exceeded by its output. In total, it contains 1 elements. This process consumes 250μA quiescents. There have been 20 terminations. It is a member of the 74ABT377 family. A voltage of 5V is used as the power supply for this D latch. Input capacitance of this device is 4pF farads. Devices in the ABTfamily are electronic devices. The part is included in FF/Latches. Vsup reaches 5.5V, the maximal supply voltage. Keeping the supply voltage (Vsup) above 4.5V is necessary for normal operation. It runs on 5Vvolts of power. Additionally, you may refer to the additional WITH HOLD MODE of the electronic flip flop.
74ABT377ADB,112 Features
Tube package
74ABT series
5V power supplies
74ABT377ADB,112 Applications
There are a lot of NXP USA Inc. 74ABT377ADB,112 Flip Flops applications.
- CMOS Process
- Bounce elimination switch
- Consumer
- 2 – Bit synchronous counter
- Latch
- Digital electronics systems
- Frequency division
- Circuit Design
- ESCC
- EMI reduction circuitry
