74ABT377AN,112
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Additional Feature | WITH HOLD MODE |
| Subcategory | FF/Latches |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74ABT377 |
| JESD-30 Code | R-PDIP-T20 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Clock Frequency | 250MHz |
| Family | ABT |
| Current - Quiescent (Iq) | 250μA |
| Current - Output High, Low | 32mA 64mA |
| Output Polarity | TRUE |
| Max I(ol) | 0.064 A |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 3.6ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Propagation Delay (tpd) | 4.9 ns |
| Power Supply Current-Max (ICC) | 30mA |
| fmax-Min | 250 MHz |
| Height Seated (Max) | 4.2mm |
| Length | 26.73mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
74ABT377AN,112 Overview
The flip flop is packaged in a case of 20-DIP (0.300, 7.62mm). You can find it in the Tubepackage. This output is configured with Non-Inverted. The trigger configured with it uses Positive Edge. In this case, the electronic component is mounted in the way of Through Hole. A supply voltage of 4.5V~5.5V is required for operation. Temperature is set to -40°C~85°C TA. A flip flop of this type is classified as a D-Type. FPGAs belonging to the 74ABTseries contain this type of chip. It should not exceed 250MHzin terms of its output frequency. In total, it contains 1 elements. It consumes 250μA of quiescent current without being affected by external factors. Terminations are 20. It is a member of the 74ABT377 family. Power is provided by a 5V supply. There is 4pF input capacitance for this T flip flop. Electronic devices of this type belong to the ABTfamily. This RS flip flops is a part number FF/Latches. As soon as 5.5Vis reached, Vsup reaches its maximum value. For normal operation, the supply voltage (Vsup) should be kept above 4.5V. The D latch operates on 5V volts. Additionally, you may refer to the D latch's additional WITH HOLD MODE.
74ABT377AN,112 Features
Tube package
74ABT series
5V power supplies
74ABT377AN,112 Applications
There are a lot of NXP USA Inc. 74ABT377AN,112 Flip Flops applications.
- Parallel data storage
- High Performance Logic for test systems
- Load Control
- Common Clocks
- Storage registers
- Bounce elimination switch
- ESCC
- Data storage
- Modulo – n – counter
- Control circuits
