74ABT377APW,118
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Additional Feature | WITH HOLD MODE |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74ABT377 |
| JESD-30 Code | R-PDSO-G20 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Clock Frequency | 250MHz |
| Family | ABT |
| Current - Quiescent (Iq) | 250μA |
| Current - Output High, Low | 32mA 64mA |
| Output Polarity | TRUE |
| Max I(ol) | 0.064 A |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 3.6ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Propagation Delay (tpd) | 4.9 ns |
| Power Supply Current-Max (ICC) | 30mA |
| fmax-Min | 250 MHz |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
74ABT377APW,118 Overview
As a result, it is packaged as 20-TSSOP (0.173, 4.40mm Width). D flip flop is embedded in the Tape & Reel (TR) package. This output is configured with Non-Inverted. This trigger uses the value Positive Edge. It is mounted in the way of Surface Mount. A supply voltage of 4.5V~5.5V is required for operation. A temperature of -40°C~85°C TAis used in the operation. There is D-Type type of electronic flip flop associated with this device. In terms of FPGAs, it belongs to the 74ABT series. This D flip flop should not have a frequency greater than 250MHz. In total, there are 1 elements. It consumes 250μA of quiescent current without being affected by external factors. There are 20 terminations,This D latch belongs to the family of 74ABT377. The power supply voltage is 5V. Its input capacitance is 4pF farads. This D flip flop belongs to the family of ABT. The RS flip flops belongs to FF/Latches base part number. The maximal supply voltage (Vsup) reaches 5.5V. Keeping the supply voltage (Vsup) above 4.5V is necessary for normal operation. In view of its reliability, this D flip flop is a good fit for TAPE AND REEL. In order for the device to operate, it requires 5V power supplies. In addition, WITH HOLD MODEis a characteristic of it.
74ABT377APW,118 Features
Tape & Reel (TR) package
74ABT series
5V power supplies
74ABT377APW,118 Applications
There are a lot of NXP USA Inc. 74ABT377APW,118 Flip Flops applications.
- ESCC
- Load Control
- Supports Live Insertion
- Event Detectors
- Cold spare funcion
- Data storage
- Common Clocks
- Instrumentation
- Parallel data storage
- Computing
