74ABT377CSCX
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Supplier Device Package | 20-SOIC |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ABT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 4.5V~5.5V |
| Frequency | 200MHz |
| Base Part Number | 74ABT377 |
| Function | Standard |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 8 |
| Clock Frequency | 200MHz |
| Propagation Delay | 6.8 ns |
| Turn On Delay Time | 6 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 50μA |
| Current - Output High, Low | 32mA 64mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 6.8ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -32mA |
| Input Capacitance | 5pF |
| Low Level Output Current | 64mA |
| Number of Input Lines | 1 |
| Number of Output Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
74ABT377CSCX Overview
The package is in the form of 20-SOIC (0.295, 7.50mm Width). Package Tape & Reel (TR)embeds it. As configured, the output uses Non-Inverted. It is configured with a trigger that uses Positive Edge. Surface Mountis positioned in the way of this electronic part. With a supply voltage of 4.5V~5.5V volts, it operates. Temperature is set to -40°C~85°C TA. This D latch has the type D-Type. The 74ABTseries comprises this type of FPGA. You should not exceed 200MHzin its output frequency. A total of 1 elements are present. It consumes 50μA of quiescent This D latch belongs to the family of 74ABT377. Input capacitance of this device is 5pF farads. There is an electronic part mounted in the way of Surface Mount. With its 20pins, it is designed to work with most electronic flip flops. This device has the clock edge trigger type of Positive Edge. There are 8bits in this flip flop. In order to achieve its superior flexibility, 8 circuits are used. A high level of efficiency can be achieved by maintaining the supply voltage at 5V. It has 8 output lines to operate. This input has 1lines. There is -32mA output current at the high level. The low level output current is set to 64mA. A temperature below 85°Cis recommended for operation. If the operating temperature is higher than -40°C, the system should operate properly. It operates with the minimal supply voltage of 4.5V. A maximum voltage of 5.5V can be provided by it. A frequency of 200MHzcan be achieved.
74ABT377CSCX Features
Tape & Reel (TR) package
74ABT series
20 pins
8 Bits
74ABT377CSCX Applications
There are a lot of ON Semiconductor 74ABT377CSCX Flip Flops applications.
- Storage registers
- Data transfer
- Guaranteed simultaneous switching noise level
- Convert a momentary switch to a toggle switch
- EMI reduction circuitry
- Load Control
- Set-reset capability
- Automotive
- Latch
- Dynamic threshold performance
