74ABT573ADB,118
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Additional Feature | BROADSIDE VERSION OF 373 |
| Subcategory | FF/Latches |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74ABT573 |
| Pin Count | 20 |
| JESD-30 Code | R-PDSO-G20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Family | ABT |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Output Polarity | TRUE |
| Max I(ol) | 0.064 A |
| Prop. Delay@Nom-Sup | 5.3 ns |
| Power Supply Current-Max (ICC) | 30mA |
| Independent Circuits | 1 |
| Delay Time - Propagation | 3.3ns |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
74ABT573ADB,118 Overview
In the 20-SSOP (0.209, 5.30mm Width) package, it can be found as an embedded module. The package is in the form of Tape & Reel (TR). In its configuration, Tri-State is used as the output. In this electrical device, the logic type is D-Type Transparent Latch. This electronic part is mounted in the way of Surface Mount. There is no supply voltage for this device. The operating temperature is -40°C~85°C. The 74ABT series is associated with this FPGA. It is designed with 8 bits. This device has been designed with 20 terminations available. It is a member of the 74ABT573 family. In order to function, the supply voltage should be set to 5V. It has 20 pins that makes it easy to use. ABT is the family of this electronic device. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. In the subcategory FF/Latches, this part belongs. During this period, the maximum supply voltage (Vsup) reaches 5.5V. There are 5V power supplies required for this machine to operate. There should be a voltage supply (Vsup) greater than 4.5V. BROADSIDE VERSION OF 373 are also a characteristic of it. There is a limit on the maximal power current (ICC) supplied by the device for operation that reaches 30mA.
74ABT573ADB,118 Features
20-SSOP (0.209, 5.30mm Width) package
74ABT series
8 Bits
74ABT573 family
20 pin count
5V power supplies
74ABT573ADB,118 Applications
There are a lot of NXP USA Inc. 74ABT573ADB,118 Latches applications.
- Shift left with parallel loading
- Clocks
- Parallel data storage
- Hammer
- Decade counting
- Automatic test equipment
- Registers
- Multistage ripple counting
- Up/down difference counting
- Control circuits
