74ABT573CMTCX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Supplier Device Package | 20-TSSOP |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ABT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 4.5V~5.5V |
| Base Part Number | 74ABT573 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 30mA |
| Number of Bits | 8 |
| Propagation Delay | 4.5 ns |
| Turn On Delay Time | 2.7 ns |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | D-Type Transparent Latch |
| High Level Output Current | -32mA |
| Low Level Output Current | 32mA |
| Number of Input Lines | 1 |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Delay Time - Propagation | 2.7ns |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74ABT573CMTCX Overview
In the 20-TSSOP (0.173, 4.40mm Width) package, it is embedded. The package is in the form of Tape & Reel (TR). In this configuration, the output is set to Tri-State. This electrical device has a logic type of D-Type Transparent Latch. The electronic component is mounted according to the Surface Mount method. The supply voltage of the device is 4.5V~5.5V. The temperature at which the machine is operating is -40°C~85°C. 74ABT is the series number of this FPGA. This electronic part is designed with 8 Bits. The family 74ABT573 includes it. In addition, it is designed with a pin number of 20. The electronic part is mounted in a way that corresponds to Surface Mount. Electronic circuits comprise 1 input lines. For maximum efficiency, the supply voltage should be set to 5V. Input lines are generated as binary equivalents by 3 output lines. There are 1 elements in it. Its superior flexibility is achieved by using 8 circuits. The low level output current is set to 32mA. -32mA is the high level output current. Lower than 85°C is the recommended operating temperature. In order for the system to operate properly, the operating temperature should be higher than -40°C. There is a maximum supply voltage of 5.5V supported by this device. A minimal voltage of 4.5V is needed to operate it.
74ABT573CMTCX Features
20-TSSOP (0.173, 4.40mm Width) package
74ABT series
8 Bits
74ABT573 family
20 pins
1 elements
74ABT573CMTCX Applications
There are a lot of ON Semiconductor 74ABT573CMTCX Latches applications.
- Parallel Output
- Ring counter
- A/D converters
- TV Set-top Boxes
- Shift right register
- Relay
- Serial Output Data Queuing
- Phase comparator
- Sample and hold register
- Pattern generators
