74ABT574ADB,118
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | BROADSIDE VERSION OF 374 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74ABT574 |
| JESD-30 Code | R-PDSO-G20 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Clock Frequency | 400MHz |
| Family | ABT |
| Current - Quiescent (Iq) | 250μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Output Polarity | TRUE |
| Max I(ol) | 0.064 A |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 4.7ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Power Supply Current-Max (ICC) | 30mA |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
74ABT574ADB,118 Overview
The item is packaged in 20-SSOP (0.209, 5.30mm Width)cases. You can find it in the Tape & Reel (TR)package. T flip flop uses Tri-State, Non-Invertedas its output configuration. This trigger uses the value Positive Edge. There is an electric part mounted in the way of Surface Mount. The JK flip flop operates at 4.5V~5.5Vvolts. The operating temperature is -40°C~85°C TA. D-Typeis the type of this D latch. FPGAs belonging to the 74ABTseries contain this type of chip. Its output frequency should not exceed 400MHz Hz. D latch consists of 1 elements. There is 250μA quiescent consumption. There are 20 terminations,Members of the 74ABT574family make up this object. A voltage of 5V is used as the power supply for this D latch. JK flip flop input capacitance is 3pF farads. ABTis the family of this D flip flop. The part is included in FF/Latches. It reaches the maximum supply voltage (Vsup) at 5.5V. The supply voltage (Vsup) should be kept above 4.5V for normal operation. In view of its reliability, this D flip flop is a good fit for TAPE AND REEL. It runs on 5Vvolts of power. A total of 2ports are embedded in the D flip flop. Additionally, you may refer to the D latch's additional BROADSIDE VERSION OF 374.
74ABT574ADB,118 Features
Tape & Reel (TR) package
74ABT series
5V power supplies
74ABT574ADB,118 Applications
There are a lot of NXP USA Inc. 74ABT574ADB,118 Flip Flops applications.
- Patented noise
- Convert a momentary switch to a toggle switch
- Single Up Count-Control Line
- Bus hold
- Individual Asynchronous Resets
- Single Down Count-Control Line
- Data Synchronizers
- Matched Rise and Fall
- Supports Live Insertion
- Common Clocks
