74ABT574AN,112
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1997 |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | BROADSIDE VERSION OF 374 |
| Subcategory | FF/Latches |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74ABT574 |
| JESD-30 Code | R-PDIP-T20 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Clock Frequency | 400MHz |
| Family | ABT |
| Current - Quiescent (Iq) | 250μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Output Polarity | TRUE |
| Max I(ol) | 0.064 A |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 4.7ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Power Supply Current-Max (ICC) | 30mA |
| Height Seated (Max) | 4.2mm |
| Length | 26.73mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
74ABT574AN,112 Overview
The flip flop is packaged in a case of 20-DIP (0.300, 7.62mm). You can find it in the Tubepackage. As configured, the output uses Tri-State, Non-Inverted. Positive Edgeis the trigger it is configured with. There is an electric part mounted in the way of Through Hole. The JK flip flop operates at a voltage of 4.5V~5.5V. A temperature of -40°C~85°C TAis considered to be the operating temperature. The type of this D latch is D-Type. It belongs to the 74ABTseries of FPGAs. A frequency of 400MHzshould not be exceeded by its output. The list contains 1 elements. As a result, it consumes 250μA quiescent current and is not affected by external forces. Terminations are 20. JK flip flop belongs to 74ABT574 family. A voltage of 5V provides power to the D latch. Its input capacitance is 3pFfarads. This D flip flop belongs to the family of ABT. It is included in FF/Latches. 5.5Vis the maximum supply voltage (Vsup). For normal operation, the supply voltage (Vsup) should be kept above 4.5V. The system runs on a power supply of 5V watts. The flip flop contains 2ports. It is also characterized by BROADSIDE VERSION OF 374.
74ABT574AN,112 Features
Tube package
74ABT series
5V power supplies
74ABT574AN,112 Applications
There are a lot of NXP USA Inc. 74ABT574AN,112 Flip Flops applications.
- Digital electronics systems
- Frequency Divider circuits
- Cold spare funcion
- Divide a clock signal by 2 or 4
- Common Clocks
- Functionally equivalent to the MC10/100EL29
- Differential Individual
- Communications
- Shift registers
- Frequency Dividers
